Services

RoHS Screening Service FAQ


Your RoHS questions answered (RoHS FAQ)

Do I need to get my products tested for RoHS compliance?

If you are an assembler of OEM or CEM product, a European manufacturer selling within the EU, or an importer of manufactured product into the EU, you must be able to demonstrate compliance with the Restriction of Hazardous Substances (RoHS) Directive (2002/95/EC) when your finished product is put on the market in the EU.

RoHS Screening Service FAQ

Which substances are restricted under RoHS?

Electronic and electrical equipment must not contain more than the maximum permitted levels of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs).

What was the deadline for RoHS compliance?

The requirements of the RoHS Directive came into force on 1st July 2006. Product put on the market since this date will be required to be compliant.

What are the implications if my product doesn’t comply with RoHS?

An enforcement authority may ask to see evidence that a producer has used due diligence and taken reasonable steps to comply with the requirements of the RoHS Directive and national legislation. Failure to comply could result in the eventual withdrawal of your product from the market.

How can I find out whether my product complies with RoHS?

If materials declarations or certificates of compliance for each component of your product are not available from your suppliers, or if you have any doubts over the accuracy or completeness of that information, it is advisable to subject your product to a screening test, which measures the concentration of the restricted substances within it.

Can’t I simply crush my product and analyse the remains?

This is a popular misconception; unfortunately the process is not so straightforward. Each homogeneous material within each individual part of the product must comply with the RoHS Directive – the housings, cabling, PCBs, components, fixtures and fittings. To detect the restricted substances, one must know which materials are permitted in a given application and which are not, and also where to look for them, since they are sometimes found deep within the sample to be tested.

Which test method is used to perform the RoHS screening analysis?

A variety of analytical techniques must be employed. Non-destructive methods only examine the surface of the sample and may not detect substances below the top few microns. A destructive test allows materials buried below the surface layer to be investigated, confirming how many homogeneous materials are present in the sample. An example of this is a semiconductor that is made of many different homogeneous materials each of which should be considered individually.

How is the meaning of homogeneous material interpreted?

A homogeneous material is usually considered to be any individual material such as a plastic or ceramic or metal. An example would be an insulated wire containing two homogeneous materials – the PVC insulation and the copper wire. Any component of a product may contain several different homogeneous materials.

How can ITA Labs help me with RoHS compliance screening?

ITA Labs is an independent laboratory that is uniquely equipped to perform RoHS screening tests. With a thorough understanding of the Directive and its implications for your business, our experienced personnel can offer impartial advice and tailor a RoHS screening programme to your specific needs. We have also invested in a diverse array of analysis equipment needed to carry out RoHS screening for the restricted elements at part-per-million levels, ensuring a very high degree of accuracy.

On completion of testing we issue a clearly-written, comprehensive and confidential report setting out the findings of our analysis of your product. At all times, you can be assured of friendly and professional service at very competitive rates.

We would be delighted to show you around our UK lab facilities and in particular, how we carry out RoHS screening test projects, without obligation.

To discuss your potential requirements, call Mark on 01727 871316.

To discuss how we could help you please contact

Mark Dowling

+44 (0) 1727 871 316

mark.dowling@italabs.co.uk
ITRI Labs